| FEATURES |
| Aluminum double parabolic cross blade louver-reflector. |
| Hinges either side. Die formed steel T-hinges. |
| Positive locking, cam action latches. Matching finish. |
| Air functions - choice of static, air supply or heat removal. |
| Integral earthquake clips. |
| Access plate for quick wiring. |
| Steel housing with white enamel finish. |
| APPLICATIONS |
| Retail Stores |
| Office Areas |
|
| CBTB - CROSS BLADE T-BAR |
| Recessed Double Parabolic T-Bar Luminaire |
|
| APPLICATION FEATURES |
| Specification grade, recessed, high performance, lay-in double parabolic louver-reflector T-Bar troffer designed for maximum efficiency and visual impact. Available in 2'x2' and 2'x4' configurations. Shallow design accommodates mounting into low ceiling plenums. Static fixtures are standard, however air supply and heat removal functions are available as options. For use in indoor retail lighting applications for T-bar ceilings, such as conveniece stores and fast food outlets, where high efficiency and visual impact are the primary considerations. |
 |
| CONSTRUCTION |
| Die formed, code gauge pre-painted white cold rolled steel housing. Die formed, cold rolled steel reveal. Wiring access plate or knockouts are provided on back of housing, for flexible conduit attachment. Ballast cover snaps into place eliminating the need for tools when accessing the ballast. Louver hinges from either side using die formed steel T-hinges. Latches use a positive locking cam action and come with matching finish. |
| MOUNTING |
| Lay-in type fixture for exposed grid type acoustical ceiling structure. Holes provided for chain mounting support to building structure. Integral earthquake clips. |
| FINISH |
| Pre-painted high reflectance white housing components. Powder painted white. reveal. |
| OPTICS |
| Double-parabolic 1.5" deep transverse blade louver with integral 4" deep parabolic shaped high reflectance specular reflector. Optional VF-1 reflectors are available. VF-1 reflectors are made of specular low irridescence, anodized aluminum with a reflectivity of 94% or better. |
|
| ELECTRICAL |
| All electrical components are CSA or UL approved. The standard voltage is 120V, 60 Hz, or as specified. Units suitable for multi-voltages and suitable for 50-60 Hz are also available. Standard electronic ballasts are instant start, with a THD of less than 20%. See Product Selection for optional ballasts. Sufficient knockouts are provided for connections and through wiring. Fixtures are provided with an access plate, to facilitate wiring to external power source. Approximately 6" ballast leads extend through wiring access cover, in order to facilitate external wiring of luminaire. |
| APPROVALS |
| Approved to CSA and UL standards. (UL, or equivalent, marked only when specified.) |
|
| OPTIONS |
|
Electronic ballasts and dimming ballasts, see Product Selection.
20 gauge riveted construction.
Polycarbonate rotary lock lampholders.
VF1- 95% reflectance, specular anodized aluminum reflector.
Air supply/return slots.
Heat removal vents.
Black reveal.
Powder painted finish.
Spring loaded cam latches.
No cartons - Bulk packed and wrapped on pallets.
|
| OPTIONAL ADDERS |
|
Emergency lighting power pack.
Flexible metal whip - 6' x 3/18 gauge conductors.
Fuse holder.
Radio interference filter.
|
|
|
