| FEATURES |
| Recessed troffer for use in 5-foot (or 1500mm) modular "T" grid ceiling system. |
| One-piece faceplate with no welds or joints. |
| Clean appearance. No exposed fasteners. |
| Optional slots for air supply or return. |
| Deep cell aluminum parabolic louver (Nominal 3") |
| Louver manufactured from low iridescent anodized aluminum. |
| Steel housing with white enamel finish. |
| Shallow design. Only 5" deep. |
| Heavy duty construction. |
| Available with 1,2,3 or 4 lamps. |
| APPLICATIONS |
| Office Areas |
| Hospital |
|
| DCFP - DEEP CELL FACE PLATE |
| Recessed Parabolic Face Plate T-Bar Luminaire |
|
| APPLICATION FEATURES |
| Specification grade, recessed, high performance, lay-in deep cell parabolic T-Bar troffer designed for maximum efficiency and visual comfort. For use in 5 foot modular T-Bar ceilings. Available with various lamp and parabolic cell configurations. Shallow design accommodates mounting into low ceiling plenums. Static fixtures are standard, however air supply and heat removal functions are available as options. Metric versions available. |
 |
| CONSTRUCTION |
| Die formed, code gauge pre-painted white cold rolled steel housing assembly. Die and brake formed, one piece 20 gauge cold rolled steel faceplate. Precision formed, anodized no. 603 semi-specular aluminum, louver. Standard nominal 3" deep cell louvers are 2 13/16" deep and are manufactured using interlocked construction and mitred corners. Wiring access plate or knockouts are provided on back of housing, for flexible conduit attachment. Knockouts are provided on ends for through wiring. Ballast cover snaps into place eliminating the need for tools when accessing the ballast. A protective film or bag is provided to protect the louver and fixture from construction dust. Louver hinges from either side. Latches use a positive locking cam action and come with matching finish. |
| MOUNTING |
| Lay-in type fixture for exposed grid type acoustical ceiling structure. Holes provided for chain mounting support to building structure. |
| FINISH |
| Pre-painted high reflectance white housing. Powder painted white. visible surfaces. |
|
| OPTICS |
| Standard nominal 3" deep cell louvers are made with a semi-specular silver finish. Optional louver finishes in champagne, gold, and white are available also in full specular and low irridescent material. Optional VF-1 reflectors are made of specular low irridescence, anodized aluminum with a reflectivity of 94% or better. Optional overlays are manufactured from a high translucence, extruded white acrylic. |
| ELECTRICAL |
| All electrical components are CSA or UL approved. The standard voltage is 120V, 60 Hz, or as specified. Units suitable for multi-voltages and suitable for 50-60 Hz are also available. Standard ballasts are electro-magnetic, energy saving where required. See Product Selection for optional ballasts. Sufficient knockouts are provided on the back and ends for connections and through wiring. Fixtures are provided with an access plate, to facilitate wiring to external power source. Approximately 6" ballast leads extend through wiring access cover, in order to facilitate external wiring of luminaire. |
| APPROVALS |
| Approved to CSA and UL standards. (UL, or equivalent, marked only when specified.) |
|
| OPTIONS |
|
T-Bar white finish.
Electronic ballasts and dimming ballasts, see Product Selection.
Louver configurations, depths and finishes. See Product Selection.
VF1- 95% reflectance, specular anodized aluminum reflector.
No cartons - Bulk packed and wrapped on pallets.
Polycarbonate rotary lock lampholders.
Air supply/return slots.
Heat removal vents.
Metric configurations. (Consult Factory.)
Filler Plate ( in lieu of one piece face plate).
|
| OPTIONAL ADDERS |
|
Emergency lighting power pack.
Fuse holder.
Radio interference filter.
Lamps installed (Specify type).
Lamps included but not installed.
Three wire cord & plug set.
Flexible metal whip - 6' x 3/18 gauge conductors.
Flexible cord feed.
Modular wiring system. (Consult factory.)
|
|
|
