| FEATURES |
| Deep cell aluminum parabolic louver (Nominal 3") |
| Louver manufactured from low iridescent anodized aluminum. |
| Shallow design. Only 5" deep. |
| Hinges either side. Die formed steel T-hinges. |
| Positive locking, cam action latches. Matching finish. |
| Black reveal. |
| Air functions - choice of static, air supply or heat removal. |
| Integral earthquake clips. |
| Access plate for quick wiring. |
| Steel housing with white enamel finish. |
| APPLICATIONS |
| Office Areas |
| Retail Stores |
|
| DCTB - DEEP CELL RECESSED T-BAR |
| Recessed Deep Cell Parabolic T-Bar Luminaire |
|
| APPLICATION FEATURES |
| Mid level, specification grade, recessed, high performance, lay-in deep cell parabolic T-Bar troffer designed for maximum efficiency and visual comfort. Available in 2'x2', 2'x4', and 1'x4' configurations. Available with various lamp and parabolic cell configurations. Shallow design accommodates mounting into low ceiling plenums. Static fixtures are standard, however air supply and heat removal functions are available as options. For use in indoor applications. |
 |
| CONSTRUCTION |
| Die formed, code gauge pre-painted white cold rolled steel housing. Die formed, cold rolled steel reveal. Precision formed, anodized no. 603 semi-specular aluminum, louver. Standard nominal 3" deep cell louvers are 2 13/16" deep and are manufactured using interlocked construction and mitred corners. Wiring access plate or knockouts are provided on back of housing, for flexible conduit attachment. Ballast cover snaps into place eliminating the need for tools when accessing the ballast. A protective film or bag is provided to protect the louver and fixture from construction dust. Louver hinges from either side using die formed steel T-hinges. Latches use a positive locking cam action and come with matching finish. |
| MOUNTING |
| Lay-in type fixture for exposed grid type acoustical ceiling structure. Holes provided for chain mounting support to building structure. Integral earthquake clips. |
| FINISH |
| Pre-painted high reflectance white housing components. Powder painted black. reveal. |
|
| OPTICS |
| Standard nominal 3" deep cell louvers are made with a semi-specular silver finish. Optional louver finishes in champagne, gold, and white are available also in full specular and low irridescent material. Optional VF-1 reflectors are available. VF-1 reflectors are made of specular low irridescence, anodized aluminum with a reflectivity of 94% or better. Optional overlays are manufactured from a high translucence, extruded white acrylic. |
| ELECTRICAL |
| All electrical components are CSA or UL approved. The standard voltage is 120V, 60 Hz, or as specified. Units suitable for multi-voltages and suitable for 50-60 Hz are also available. Standard ballasts are electro-magnetic, energy saving where required. See Product Selection for optional ballasts. Sufficient knockouts are provided for connections and through wiring. Fixtures are provided with an access plate, to facilitate wiring to external power source. Approximately 6" ballast leads extend through wiring access cover, in order to facilitate external wiring of luminaire. |
| APPROVALS |
| Approved to CSA and UL standards. (UL, or equivalent, marked only when specified.) |
|
| OPTIONS |
|
Electronic ballasts and dimming ballasts, see Product Selection.
20 gauge riveted construction.
Polycarbonate rotary lock lampholders.
Louver configurations, depths and finishes. See Product Selection.
VF1- 95% reflectance, specular anodized aluminum reflector.
Air supply/return slots.
Note: Air supply slots on 1x4 units require the use of a deeper housing. (Consult factory.)
Heat removal vents.
White reveal.
Powder painted finish.
Spring loaded cam latches.
Shallow housing for limited plenum access.
No cartons - Bulk packed and wrapped on pallets.
|
| OPTIONAL ADDERS |
|
Emergency lighting power pack.
Extra ballast cover (for symmetry).
Acrylic translucent overlay.
Flexible metal whip - 6' x 3/18 gauge conductors.
Fuse holder.
Radio interference filter.
|
|
|
