| FEATURES |
| Ideal for commercial recreation areas. |
| Heavy duty construction. |
| Heavy duty narrow cell wire guard. |
| Hinged frame retains wire guard with or without diffuser, for easy maintenance. |
| Hinges either side. Die formed steel T-hinges. |
| Access plate for quick wiring. |
| Available with 1, 2, 3, 4 or 6 lamps. |
| Uses T8 or T12 lamps. |
| Steel housing with white enamel finish. |
| APPLICATIONS |
| Gymnasiums |
| Recreation Rooms |
| Athletic Centers |
| Vandal Prone Areas |
|
| GYMR - GYMNASIUM RECESSED |
| Recessed Static T-Bar Luminaire |
|
| APPLICATION FEATURES |
| Mid Grade, recessed, lay-in T-Bar luminaire with framed door. For use in high abuse indoor applications. Available in 2'x2', 2'x4', and 1'x4' configurations. |
 |
| CONSTRUCTION |
| Die formed and embossed, code gauge pre-painted white cold rolled steel housing assembly. Die formed and spot welded, heavy gauge cold rolled steel door frame. Welded, 11 gauge, narrow cell (1" x 4"), cold rolled steel wire guard. Embossed housing for strength and rigidity. Wire guard and optional overlay is held within a rugged hinged door frame by retaining springs. The heavy gauge door frame hinges downward, on either side, and is held in the closed position by two positive cam latches. The metal-to-metal design of the door eliminates most light leaks. Ballast cover snaps into place eliminating the need for tools when accessing the ballast. Wiring access plate or knockouts are provided on back of housing, for flexible conduit attachment. (4' Units only.) Knockouts are provided on ends for through wiring. |
| MOUNTING |
| Lay-in type fixture for exposed grid type acoustical ceiling structure. Holes provided for chain mounting support to building structure. |
|
| FINISH |
| Pre-painted high reflectance white housing. Powder painted white. wireguard and door frame. |
| OPTICS |
| Optional shielding is available. Optional VF-1 reflectors are made of specular low irridescence, anodized aluminum with a reflectivity of 94% or better. |
| ELECTRICAL |
| All electrical components are CSA or UL approved. The standard voltage is 120V, 60 Hz, or as specified. Units suitable for multi-voltages and suitable for 50-60 Hz are also available. Standard ballasts are electro-magnetic, energy saving where required. See Product Selection for optional ballasts. Sufficient knockouts are provided on the back and ends for connections and through wiring. Fixtures are provided with an access plate, to facilitate wiring to external power source. Approximately 6" ballast leads extend through wiring access cover, in order to facilitate external wiring of luminaire. |
| APPROVALS |
| Approved to CSA and UL standards. (UL, or equivalent, marked only when specified.) |
|
| OPTIONS |
|
Electronic ballasts and dimming ballasts, see Product Selection.
VF1- 95% reflectance, specular anodized aluminum reflector.
Powder painted finish.
No cartons - Bulk packed and wrapped on pallets.
20 gauge riveted construction.
Polycarbonate rotary lock lampholders.
|
| OPTIONAL ADDERS |
|
Emergency lighting power pack.
Fuse holder.
Radio interference filter.
Earth quake clips.
Lamps installed (Specify type).
Lamps included but not installed.
Light leak bands.
Light leak gasketing.
Three wire cord & plug set.
Flexible metal whip - 6' x 3/18 gauge conductors.
Flexible cord feed.
Modular wiring system. (Consult factory.)
Prismatic acrylic diffuser.
Prismatic high impact acrylic diffuser.
Polycarbonate diffuser.
|
|
|
