| FEATURES |
| Flip-up socket bars. |
| Available with full, half and asymmetrical reflectors. |
| Single piece reflectors for 6' and 8' lamps. |
| Continuous raceway and row mounting capability. |
| Surface, stem, or chain mountable. |
| Uses T8 or T12 lamps. |
| Steel housing and ends with white enamel finish. |
| Available in aluminum, for salty or corrosive environments. |
| APPLICATIONS |
| Warehouse Aisles |
| Warehouse Areas |
| Manufacturing Areas |
| Garage and Workshops |
| Utility Area |
| Large Storage Rooms |
| Coves |
|
| IND2 - INDUSTRIAL TWO LAMP |
| Premium Industrial Luminaire |
|
| APPLICATION FEATURES |
| Mid Grade, fluorescent industrial fixture. For use in indoor applications where low cost, but industrial grade ruggedness is required. Available in lengths from 18 to 96 inches. Socket bar flips up for easy installation. Converts to raceway for continuous row mounting. |
 |
| CONSTRUCTION |
| Die and brake formed, code gauge pre-painted white cold rolled steel. Screw fastened end plates can be repositioned to serve as joiners for continuous row mounting, thus forming a continuous, uninterupted wireway (on non-welded units only). Single piece reflector on non-tandem units. Knockouts are provided for flexible conduit attachment. |
| MOUNTING |
| Knock-outs are provided for stem mounting. Mounting holes are provided. Optional V (Speedy) hangers accommodate chain (not provided). |
| FINISH |
| Pre-painted high reflectance white. |
| OPTICS |
| Standard reflectors are solid and are coated with a durable, high reflectance white finish. Optional reflectors are available with 1/2 reflector or asymmetric cutoffs. Optional reflectors are available with a slotted uplight component. Optional reflector configurations are availiable in VF, high reflectance specular aluminum. |
|
| ELECTRICAL |
| All electrical components are CSA or UL approved. Lamp holders provided ensure positive lamp retention. Lamp holders with rotary locks are available. Standard ballasts are electro-magnetic, energy saving where required. See Product Selection for optional ballasts. The standard voltage is 120V, 60 Hz, or as specified. Other Voltage and frequency ratings are also available. Sufficient knockouts are provided on the back and ends for connections and through wiring. |
| APPROVALS |
| Approved to CSA and UL standards. (UL, or equivalent, marked only when specified.) |
|
| OPTIONS |
|
Slotted full reflector, painted white.
14" reflector, painted white.
Asymmetric reflector, painted white.
1/2 reflector, painted white.
VF1- 95% reflectance, specular anodized aluminum reflector.
20 gauge riveted construction.
20 gauge welded construction.
Electronic ballasts and dimming ballasts, see Product Selection.
Polycarbonate rotary lock lampholders.
Individual & custom packaging (select units only).
No cartons - Bulk packed and wrapped on pallets.
|
| OPTIONAL ADDERS |
|
Heavy duty wire guards. powder coated white finish, comes with mounting hardware.
Fuse holder.
Pull chain switch
Aligner clips, for row mounting.
Speedy Hangers.
|
|
|
