| CONSTRUCTION |
| Die formed, 20 gauge cold rolled steel One piece folded construction. Diffuser snaps into housing for easy installation and re-lamping. Flattened knockouts are provided on ends for flexible conduit attachment. |
| MOUNTING |
| Key holes provided for easy mounting. Flush mounting surface contains no offsets or exposed fastener heads. |
| FINISH |
| Powder painted white. High reflectivity coated, reflecting surfaces for improved efficiency. |
| OPTICS |
| Co-extruded, linear prismatic acrylic lens. Clear bottom face provides maximum illumination onto the work surface. Diffuse, near opaque, front face provides soft white glow to minimize eye fatigue due to glare. |
|
| ELECTRICAL |
| All electrical components are CSA or UL approved. Ballasts and lamp holders are replaceable without removing the luminaire from the mounting surface. Ballast is mounted on housing, to ensure that wire feed as well as grounding/bonding conductor is attached to housing. The standard voltage is 120V, 60 Hz, or as specified. Electronic ballast is standard. Sufficient knockouts are provided on the back and ends for connections and through wiring. |
| APPROVALS |
| Approved to CSA and UL standards. (UL, or equivalent, marked only when specified.) |
|
| OPTIONS |
|
Consult factory for other finishes.
|
| OPTIONAL ADDERS |
|
Feed connector with reducer for 1/4" K.O. (17/32" opening).
Rocker switch
Pull chain switch
Turn switch
|
|
