| FEATURES |
| Clear acrylic wraparound difuser with P19 prismatic bottom and ribbed linear sides. End caps are integral to difuser. |
| Positive sealing and hinging of diffuser with 4 concealed spring-loaded pins. |
| Available with 1 or 2 lamps. |
| Easy re-lamping and re-ballasting. |
| Surface, stem, or chain mountable. |
| Steel housing with white enamel finish. |
| APPLICATIONS |
| Class Rooms |
| Corridors |
|
| UNI - UNITRON |
| Premium Surface Ceiling Mount Wraparound Luminaire |
|
| APPLICATION FEATURES |
| Specification grade, surface mounted wraparound luminaire with low brightness linear sides. Suitable for pendant mounting. For use in indoor applications where low glare, high efficiency, high performance and ease of installation are required. |
 |
| CONSTRUCTION |
| Die formed, 22 gauge cold rolled steel housing. Injection molded plastic end caps are integral to the difuser. Diffuser hinges and latches from either side by use of a concealed spring loaded pin mechanism. Flattened knockouts are provided on ends for flexible conduit attachment. |
| MOUNTING |
| Offset mounting pads which keeps luminaire level and slightly off of mounting surface, are formed within the housing. Mounting holes are provided within offset to prevent distortion of housing when tightening mounting fasteners. Knock-outs are provided for stem mounting. Optional stem and canopy sets are available in multiples of six inches. |
| FINISH |
| Powder painted high reflectance white housing components. Specular, high reflectance, anodized VF-1 reflector. |
|
| OPTICS |
| Wrap-around, extruded clear acrylic diffuser with prismatic bottom and ribbed linear sides, designed for high efficiency and visual comfort. Injection molded plastic end caps are integral to diffuser. |
| ELECTRICAL |
| All electrical components are CSA or UL approved. Ballasts and lamp holders are replaceable without removing the luminaire from the mounting surface. Standard ballasts are electro-magnetic, energy saving where required. See Product Selection for optional ballasts. The standard voltage is 120V, 60 Hz, or as specified. Sufficient knockouts are provided on the back and ends for connections and through wiring. |
| APPROVALS |
| Approved to CSA and UL standards. (UL, or equivalent, marked only when specified.) |
|
| OPTIONS |
|
Clear prismatic acrylic lens # 19 pattern.
VF1- 95% reflectance, specular anodized aluminum reflector.
Electronic ballasts and dimming ballasts, see Product Selection.
|
| OPTIONAL ADDERS |
|
Emergency lighting power pack.
Speedy Hangers.
Stem and canopy sets.
|
|
|
