| FEATURES |
| Class I, Division 2, Group A, B, C, D |
| Class II Group F, G |
| Class III |
| Dust and moisture resistant. |
| Structurally rigid fiberglass body. |
| High impact acrylic DR diffuser held with positive cam latches. |
| Continuous poured in place gasket. No joints to open. |
| Suitable for indoor or outdoor applications. |
| Uses T8 or T12 lamps. |
| APPLICATIONS |
| Hazardous Locations |
| Parking Garages |
| Garage and Workshops |
| Canopies |
| Carwash |
| Cleanrooms |
| Cold Storage |
| Dusty Environments |
| Food Processing |
| Wet and Damp Environments |
|
| VHL - VAPOUR HAZARDOUS LOCATIONS |
| Vapour Proof Hazardous Location Luminaire |
|
| APPLICATION FEATURES |
| Mid level, specification grade, fluorescent enclosed and gasketed fixture. For use in hazardous locations. For use in both indoor and outdoor applications where dust and moisture resistance is required. Available in 4 and 8 foot lengths. |
 |
| CONSTRUCTION |
| Moulded, glass reinforced plastic housing. Internal housing assembly code gauge pre-painted white cold rolled steel. Continuous poured in place gasket. Diffuser flange fits into the gasketed retention slot providing a continuous seal, and is held in place with retaining latches. Hole is 7/8" diameter and is provided with a threaded and gasketted hub for rigid 1/2" conduit attachment. |
| MOUNTING |
| Offset mounting pads which keeps luminaire level and slightly off of mounting surface, are formed within the housing. |
| FINISH |
| High reflectivity coated, reflecting surfaces for improved efficiency. |
|
| OPTICS |
| Standard diffuser is high impact acrylic with textured pattern designed for high efficiency while providing reduced glare. Smooth surface faces outwards. |
| ELECTRICAL |
| All electrical components are CSA or UL approved. Ballasts and lamp holders are replaceable without removing the luminaire from the mounting surface. Standard ballasts are electro-magnetic, energy saving where required. See Product Selection for optional ballasts. The standard voltage is 120V, 60 Hz, or as specified. |
| APPROVALS |
| CSA approved. Class I Division 2, Groups A,B,C,D. Class II, Groups F,G. Class III |
|
| OPTIONS |
|
Clear prismatic polycarbonate lens.
Polycarbonate rotary lock lampholders.
Tamperproof latches.
No cartons - Bulk packed and wrapped on pallets.
|
| OPTIONAL ADDERS |
|
Mounting brackets.
|
|
|
