| FEATURES |
| Deep cell aluminum parabolic louver (Nominal 4") |
| Meets preferred criteria of IES RP-1. |
| Louver manufactured from low iridescent anodized aluminum. |
| Hinges either side. Die formed steel T-hinges. |
| Positive locking, cam action latches. Matching finish. |
| Shallow design. Only 6" deep. |
| Black reveal. |
| Air functions - choice of static, air supply or heat removal. |
| Integral earthquake clips. |
| Access plate for quick wiring. |
| Steel housing with white enamel finish. |
| APPLICATIONS |
| Office Areas |
| VDT Environment |
|
| VMTB - VISIMAX T-BAR |
| Recessed Deep Cell Parabolic T-Bar Luminaire |
|
| APPLICATION FEATURES |
| Specification grade, recessed, high performance, lay-in deep cell parabolic T-Bar troffer designed for maximum efficiency and visual comfort. Nominal 4" deep louver. Precision engineered to eliminate glare. In particular, the optimal positioning of the lamps provides uniform low brightness in the glare producing 60-90 degrees zone. Available in 2'x2' and 2'x4' configurations. Shallow design accommodates mounting into low ceiling plenums. Static fixtures are standard, however air supply and heat removal functions are available as options. For use in indoor applications. |
 |
| CONSTRUCTION |
| Die formed, code gauge pre-painted white cold rolled steel housing. Die formed, cold rolled steel reveal. Precision formed, low iridescence, anodized specular aluminum parabolic deep cell louver. Standard Visimax louvers are 4 1/4" deep and are manufactured using interlocked construction and mitred corners. Wiring access plate or knockouts are provided on back of housing, for flexible conduit attachment. Ballast cover snaps into place eliminating the need for tools when accessing the ballast. A protective film or bag is provided to protect the louver and fixture from construction dust. Louver hinges from either side using die formed steel T-hinges. Latches use a positive locking cam action and come with matching finish. |
| MOUNTING |
| Lay-in type fixture for exposed grid type acoustical ceiling structure. Holes provided for chain mounting support to building structure. Integral earthquake clips. |
| FINISH |
| Pre-painted high reflectance white housing components. Powder painted black. reveal. |
|
| OPTICS |
| Standard nominal 4" deep cell louvers are made with a specular silver finish. Louvers are notched in order to provide optimal positioning of the lamps. Optional VF-1 reflectors are made of specular low irridescence, anodized aluminum with a reflectivity of 94% or better. |
| ELECTRICAL |
| All electrical components are CSA or UL approved. The standard voltage is 120V, 60 Hz, or as specified. Units suitable for multi-voltages and suitable for 50-60 Hz are also available. Standard ballasts are electro-magnetic, energy saving where required. See Product Selection for optional ballasts. Sufficient knockouts are provided for connections and through wiring. Fixtures are provided with an access plate, to facilitate wiring to external power source. Approximately 6" ballast leads extend through wiring access cover, in order to facilitate external wiring of luminaire. |
| APPROVALS |
| Approved to CSA and UL standards. (UL, or equivalent, marked only when specified.) |
|
| OPTIONS |
|
Electronic ballasts and dimming ballasts, see Product Selection.
20 gauge riveted construction.
Polycarbonate rotary lock lampholders.
VF1- 95% reflectance, specular anodized aluminum reflector.
Air supply/return slots.
Heat removal vents.
White reveal.
Powder painted finish.
Spring loaded cam latches.
No cartons - Bulk packed and wrapped on pallets.
|
| OPTIONAL ADDERS |
|
Emergency lighting power pack.
Flexible metal whip - 6' x 3/18 gauge conductors.
Fuse holder.
Radio interference filter.
Lamps installed (Specify type).
Lamps included but not installed.
|
|
|
